Technical Data Sheet Acrylic

Product Description

Acrylic is a one-component, elasto-plastic sealing putty based on acrylic aqueous dispersion, which is designed for joints between construction parts exposed to low stresses.

Acrylic is ready to use and gives excellent performances both in inside and outside situations, showing good adhesion on porous surfaces such as concrete, plaster, asbestos, brickwork, cement, wood. Not recommended for joints in continous contact with water.

General information

Composition

Acrylic basis

Consistency

Pasty

Packing

320 Kg / drum

Printability

Acrylic can be painted in almost any kind of paint.

Typical Values

Specific weight

(1.45 +/- 0.05) g/cm³

Skin over time

10 20 minutes

Curing time

1-4 weeks according to joint thickness, temperature and air humidity

Characteristic after hardening

Volume variation

(-12 +/- 2) %

E-module 100%

(0.31 +/- 0.02) N / mm²

Joint movement capability in services

6% of joint width

Service temperature

- 25 C to + 80 C

Application

Surface Preparation

Surface must be clean from dust, oil, grease, bitumen and ice. Minimum joint width 6 * 6 mm / max. 25 * 20 mm.

Use diluted Acrylic (at brushable consistency), as a primer for high porous surfaces.

Acrylic will show good adhesion even on wet surfaces.

Application temperature

+ 5 C to + 50 C

Shelf Life

Up to 12 months / store cool and dry / protected from freezing and heat.

Warning

Don't apply in case or imminent danger of rain. Protect from rain for at least 6 hours after application.